Boat Covers
Custom Marine Concepts cover systems — cover your boat in 60 seconds or less. Digitally measured, hand-sewn in the USA, installed at your dock.
Why A Custom Cover
Cover Your Boat In 60 Seconds Or Less
Most boat covers stay in the dock box because they are a two-person, twenty-minute fight. A Marine Concepts cover rides on a patented track mounted to your dock or lift, so it glides over the boat like a curtain — one person can cover a 30-foot boat in about a minute. No snaps, no crawling across the deck.
Because the cover is patterned from a digital model of your exact hull, it cinches tight below the rub rail and down the hull. Pests, dirt, pollen, and UV stay out — you uncover a boat as clean as you left it.
Authorized dealer
Official Marine Concepts Dealer
Waterfront Solutions is an authorized Marine Concepts dealer and installer on the Chesapeake Bay. We digitally measure your boat on the lift, Marine Concepts hand-sews the cover to order at their Lake of the Ozarks shop, and our crew mounts the track system to fit your dock. One point of contact from first measurement to final fit.
How It Works
Measured, Sewn, And Installed To Fit
1
Digital measurement on your lift
We capture the exact dimensions of your boat with digital measuring tools. Marine Concepts' design team builds a model from that data and creates a pattern unique to your vessel — towers, arches, and outboards included.
2
Hand-sewn to order in the USA
Every cover is cut and hand-sewn by Marine Concepts' craftsmen in Lake of the Ozarks, Missouri, using next-generation Aqualon Edge marine fabric. No off-the-shelf sizing — your cover fits your boat and nothing else.
3
Track system installed on your dock
Our crew mounts the patented track system to your dock or lift and hangs the cover so it glides on and off like a curtain. The zipper and drawstring cinch a complete seal that extends to the bottom of the hull.
Coverage Range
Fits Boats From 20 To 60 Feet
Roofed docks, open-air docks and lifts, sectional docks — the track system adapts to the structure you already have. These are the hulls we cover most:
Pontoons & tritoons
Rails, furniture, and helm stay covered — the seal runs below the deck line.
Tow & wake boats
Patterned around towers, racks, and speakers without stretching or chafing.
Bow riders & sport boats
Cinches under the rub rail so the cockpit and upholstery stay spotless.
Cruisers
One person covers a full-beam cruiser in minutes — no climbing over the swim platform.
Performance boats
Custom-fit around low freeboard and wide beams, up to 60 feet.
Materials
Built From Marine-Grade Fabric
Aqualon Edge fabric
Next-generation marine fabric that sheds weather and UV season after season. Hand-sewn seams built to be pulled on and off every weekend, not babied.
A complete seal
The zipper and drawstring design seals around the boat and extends to the bottom of the hull — insects, dust, weather, and sun stay out.
Mooring & travel covers
Boat lives on a mooring ball or a trailer? Marine Concepts builds custom mooring and travel covers too — same digital measurement, same fabric, no track required.
Five fabric colors — tan, gray, black, navy, and light gray — so the cover matches your boat and your dock.
Common Questions
Boat Cover FAQ
How fast can one person really cover a boat?
About a minute for a 30-foot boat. The cover hangs from a track mounted overhead, so you pull it across like a curtain, zip the entry, and cinch the drawstring. Covering the boat stops being the chore you skip on Sunday evening.
Will it work with my dock?
The track system installs on most structures — roofed docks, open-air docks and lifts, and sectional docks. We confirm the mounting layout during the site visit and tailor the install to your dock's framing.
Will it work with my boat lift?
Yes. Covers pair naturally with lifts — all of our installs go over a lifted boat. If you are planning both, we spec the lift and the cover together so the track and the cradle work as one system.
What boats can be covered?
Most boats between 20 and 60 feet: pontoons, tow boats, bow riders, center consoles, cruisers, and performance hulls. Because every cover is patterned from a digital model of your specific boat, towers, radar arches, and outboards are not a problem.
How is the cover made?
We digitally measure your boat on the lift. Marine Concepts' design team builds a model from that data, and their craftsmen hand-sew the cover in Lake of the Ozarks, Missouri, from Aqualon Edge marine fabric. Our crew installs the track and the cover when it arrives.
What does a custom cover system cost?
It depends on boat length and the track layout your dock needs. We measure first, then give you a firm written quote — no phone-call ballparks. Call (443) 699-0722 and we will set up a visit.
I keep my boat on a trailer or mooring — can I still get one?
Yes. Marine Concepts also builds custom mooring and travel covers. Same digital measurement, same hand-sewn Aqualon fabric — just without the dock-mounted track.
Request A Free Quote
Send Us A Message
Fill out the form and one of our team will reach out to schedule a free on-site consultation at your waterfront.
Question, comment, or anything else? Drop us a note and we'll get back the same business day.
Request A Free Quote
Send Us A Message
Fill out the form and one of our team will reach out to schedule a free on-site consultation at your waterfront.
Question, comment, or anything else? Drop us a note and we'll get back the same business day.